|
<< 点击显示目录 >> 主页 ACOPOS 6D使用手册 > mapp 6D > 通用信息 > 系统要求 |
下表显示了从哪个版本的 AS 开始可以使用哪个版本的 mapp 6D。表中列出的每个版本都已通过 B&R 网站或 AS 升级正式发布。
ACOPOS 6D controller firmware |
Planar motor tool |
Automation Studio |
Automation Runtime |
mapp Motion |
|
V 1.6 |
117.5.14 |
117.1.17 |
4.9.2 or later |
C4.90 or later |
5.10 or later |
V 1.7 |
117.6.17 |
117.1.17 |
4.9.2 or later |
C4.90 or later |
5.22 |
V 1.8 |
117.9.20 |
117.1.17 |
4.9.2 or later |
C4.90 or later |
5.22 |
V 1.9 |
117.9.20 |
117.3.3 |
4.9.2 or later |
C4.90 or later |
5.24 |
V1.10 |
117.13.24 |
117.6.1 |
4.9.2 or later |
C4.90 or later |
5.24 |
V1.11 |
117.13.51 |
117.6.5 |
4.9.2 or later |
C4.90 or later |
5.24 |
The following table shows which mapp 6D version is available starting with which version of Automation Studio. Each version listed in this table has been officially released via the B&R website or Automation Studio upgrades.
ACOPOS 6D controller firmware |
Planar motor tool |
Automation Studio |
Automation Runtime |
mapp Motion |
|
V 1.6 |
117.5.14 |
117.1.17 |
4.9.2 or later |
C4.90 or later |
5.10 or later |
V 1.7 |
117.6.17 |
117.1.17 |
4.9.2 or later |
C4.90 or later |
5.22 |
V 1.8 |
117.9.20 |
117.1.17 |
4.9.2 or later |
C4.90 or later |
5.22 |
V 1.9 |
117.9.20 |
117.3.3 |
4.9.2 or later |
C4.90 or later |
5.24 |