库 McAcp6D

纠错

•在大型系统中，某些命令可能偶尔会中止。功能块 (CommandAborted) 的输出未设置，导致应用程序行为不正确。

原因/解决方法

•已纠正内部错误。

库 McAcp6D -

MC_BR_AutoZoneCtrl_Acp6D

错误更正

•自动区域功能不起作用。

原因/解决方案：

•已更正内部错误。

库 McAcp6D - MC_BR_RotaryMotionSpin_Acp6D

错误纠正

•虽然运动尚未完成，但输出 "完成 "已提前设置。

•功能块偶尔会返回通用 CMD 错误。

原因/解决方案：

•已纠正内部错误。

库 McAcp6D - MC_BR_AsmPowerOn_Acp6D

错误纠正

•使用 "AsmPowerOn "识别托盘偶尔无法完成。

原因/解决方案：

•已纠正内部错误。

库 McAcp6D - MC_BR_AsmStop_Acp6D

错误纠正

•如果在 MC_BR_AsmStop_Acp6D 仍在执行运动时调用该功能块，则会导致死锁。

原因/解决方法：

•已纠正内部错误。

库 McAcp6D - MC_BR_PowerSecGetInfo_Acp6D

错误纠正

•在组件关闭时查询电源扇区的状态，返回 mcACP6D_POWER_SEC_OPERATION。

原因/解决方法：

•已纠正内部错误。已读回预期状态 (mcACP6D_POWER_SEC_INACTIVE_CLOSE)。

库 McAcp6D - MC_BR_ShReadInfo_Acp6D

纠错

•不能正确显示已移除的托盘的状态。

原因/解决方法：

•已纠正内部错误。已读回预期状态 (mcACP6D_SH_STATE_UNDETECTED)。

库 McAcp6D - MC_BR_MacroDelete_Acp6D

纠错

•已定义宏的 "mcACP6D_MACRO_DELETE_ALL "模式会导致页面错误。

•如果未定义宏，"mcACP6D_MACRO_DELETE_ALL "模式将导致错误。

原因/解决方案：

•已纠正内部错误。

Automation 帮助 - McAcp6D

错误更正

•说明中的文本错误。

•接口描述表中缺少输出 "确认"。

•接口描述表中存在死链接。

原因/解决方案：

•一般纠错

Library McAcp6D

Error correction

•With large systems, certain commands may occasionally be aborted. The outputs of the function block (CommandAborted) are not set, which results in incorrect application behavior.

Cause/Solution:

•Internal errors have been corrected.

Library McAcp6D -

MC_BR_AutoZoneCtrl_Acp6D

Error corrections

•Auto zone functionality does not work.

Cause/Solution:

•Internal errors have been corrected.

Library McAcp6D - MC_BR_RotaryMotionSpin_Acp6D

Error correction

•Output "Done" is set early, even though the movement has not yet been completed.

•The function block occasionally returns a generic CMD error.

Cause/Solution:

•Internal errors have been corrected.

Library McAcp6D - MC_BR_AsmPowerOn_Acp6D

Error correction

•Identification of the shuttles with "AsmPowerOn" is occasionally not completed.

Cause/Solution:

•Internal errors have been corrected.

Library McAcp6D - MC_BR_AsmStop_Acp6D

Error correction

•The function block causes a deadlock if it is called while MC_BR_AsmStop_Acp6D is still performing a movement.

Cause/Solution:

•Internal errors have been corrected.

Library McAcp6D - MC_BR_PowerSecGetInfo_Acp6D

Error correction

•Querying the state of a power sector when the assembly is switched off returns mcACP6D_POWER_SEC_OPERATION.

Cause/Solution:

•The internal error has been corrected. The expected state (mcACP6D_POWER_SEC_INACTIVE_CLOSE) is read back.

Library McAcp6D - MC_BR_ShReadInfo_Acp6D

Error correction

•The state of a shuttle that has already been removed is not displayed correctly.

Cause/Solution:

•The internal error has been corrected. The expected state (mcACP6D_SH_STATE_UNDETECTED) is read back.

Library McAcp6D - MC_BR_MacroDelete_Acp6D

Error correction

•Mode "mcACP6D_MACRO_DELETE_ALL" with already defined macros results in a page fault.

•Mode "mcACP6D_MACRO_DELETE_ALL" results in an error if no macros are defined.

Cause/Solution:

•Internal errors have been corrected.

Automation Help - McAcp6D

Error correction

•Text errors in the descriptions.

•Output "Acknowledge" is missing in the interface description table.

•Dead links exist in the interface description table.

Cause/Solution:

•General error corrections