|
<< 点击显示目录 >> 主页 ACOPOS 6D使用手册 > mapp 6D > 功能块 > McAcp6D > Function blocks > MC_BR_PowerSecDeactivate_Acp6D > Function description |
在执行该功能块时，输出端 "Busy "将被设置。ACOPOS 6D 控制器接受命令后，动力扇区内的所有托盘将以受控方式降落，功能块将设置输出 "确认"。动力扇区状态变为 PowerSectorDeactivating（mcACP6D_POWER_SEC_DEACTIVATING）。
当所有托盘着陆后，停用动力扇区内的所有定子电机，并用屏障将动力扇区与组件的其他部分隔开，然后设置输出 "完成"。动力扇区状态变为 PowerSectorInactiveClose (mcACP6D_POWER_SEC_INACTIVE_CLOSE)。在 AssemblyReady 状态下，装配状态不受此命令影响。
信息：
在停用扇区期间，不允许任何托盘出现在扇区屏障上。
如果在命令处理过程中出现问题，功能块将设置输出 "Error"，并在输出 "ErrorID "上报告相应的错误编号。
This function block deactivates all segments within the power sector.
Output "Busy" is set while the function block is being executed. As soon as the ACOPOS 6D controller accepts the command, all shuttles within the power sector are landed in a controlled manner and output "Acknowledge" is set by the function block. The power sector state changes to PowerSectorDeactivating (mcACP6D_POWER_SEC_DEACTIVATING).
When all shuttles have landed, all segments within the power sector are deactivated and the power sector is separated from the rest of the assembly with a barrier, then output "Done" is set. The power sector state changes to PowerSectorInactiveClose (mcACP6D_POWER_SEC_INACTIVE_CLOSE). The assembly state remains unaffected by this command in state AssemblyReady.
Information:
During deactivation of a power sector, no shuttles are permitted to be on the power sector barrier.
If a problem occurs during command processing, the function block sets output "Error" and reports the corresponding error number on output "ErrorID".